Configuring The Host System - Lenze PROFIBUS PT E82ZAFPC010 Instructions De Montage

Configuring the host system

The host must be configured before communication with the communication module is
possible.
Master settings
For configuring the PROFIBUS, the device data base file (GSE file) of the communication
module has to be imported into the configuring software of the master.

Tip!
The GSE file can be downloaded in the "Services & Downloads" area at
www.Lenze.com.
EDK82ZAFPC-010 DE/EN/FR 6.0
Configuring the host system

Commissioning 7
67