Operation; Switching Off; Temperature Regulation - FUST NOVAMATIC SÖ1840-IB Notice D'utilisation

47

OPERATION

Control panel
High temperature alarm light
1
Power indicator light
2
ActionFreeze light
3
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up.
If the temperature inside the
appliance is too high the Alarm
light will blink. Active the
ActionFreeze function.

Switching off

Turn the Temperature regulator to the OFF
position.

Temperature regulation

The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
1 2 3 4
ActionFreeze switch and Alarm reset
4
• to obtain the minimum coldness, turn
the Temperature regulator towards
• to obtain the maximum coldness, turn
the Temperature regulator towards
A medium setting is generally
the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature inside
the appliance depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
High temperature alarm
An increase in the temperature in the
freezer (for example due to an power failure)
is indicated by:
• switching on of the Alarm light
• sounding of buzzer
During the alarm phase, the buzzer can be
switched off by pressing the Alarm reset
switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
.
.