Operation; Switching Off; Temperature Regulation - FUST NOVOMATIC SUPER ÖKO+ 2230.1-IB Notice D'utilisation

45

OPERATION

Control panel
1 2
Switching on
1
2
7
6 4
5
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator to the
Full Loaded position and let the
appliance run for 24 hours to allow the
correct temperature to be reached
before placing food inside.
The power indicator light will light up.
3. Adjust the Temperature Regulator
according to the quantity of the stored
foods.

Switching off

Turn the Temperature regulator to the OFF
position.

Temperature regulation

The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
3
A
B
3
C
Temperature regulator
1
Power indicator light
2
High temperature alarm light
3
A. Temperature Regulator
B. Half Loaded position
C. Full Loaded position
• to obtain the minimum coldness, turn
the Temperature Regulator toward lower
settings.
• to obtain the maximum coldness. turn
the Temperature Regulator toward
higher settings.
In case of freezing less food
volumes, the Half Loaded
setting is the most suitable. In
case of freezing much food
volumes, the Full Loaded setting
is the most suitable.
High temperature alarm
An increase in the temperature in the
freezer (for example due to a power failure)
is indicated by switching on of the Alarm
light .
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored, the
Alarm light will switch off automatically.