Safety Instructions - VITLAB micropipette Mode D'emploi

1. Safety Instructions

Please read the following carefully!
This instrument may sometimes be used with hazardous materials, operations, and equipment. It is
beyond the scope of this manual to address all of the potential safety risks associated with its use in
such applications. It is the responsibility of the user of this pipette to consult and establish appropri-
ate safety and health practices and determine the applicability of regulatory limitations prior to use.
1. Every user must read and understand this
operating manual prior to using the instru-
ment and observe these instructions during
use.
2. Follow general instructions for hazard pre-
vention and safety instructions; e.g., wear
protective clothing, eye protection and
gloves. When working with infectious or
other hazardous samples, all appropriate re-
gulations and precautions must be followed.
3. Observe all specifications provided by rea-
gent manufacturers.
4. Only use the instrument for pipetting liquids
that conform to the specifications defined
in the limitations of use and operating limi-
tations. Observe operating exclusions (see
page 23). If in doubt, contact the manufac-
turer or supplier.
5. Always use the instrument in such a way
that neither the user nor any other person is
endangered. Avoid splashes. Use only suita-
ble vessels.
22
6. Avoid touching the tip orifices when wor-
king with hazardous samples.
7. Never use force on the instrument!
8. Use only original spare parts. Do not at-
tempt to make any technical alterations. Do
not dismantle the instrument any further
than is described in the operating manual!
9. Before use check the instrument for visible
damages. If there is a sign of a potential
malfunction (e.g., piston difficult to move,
leakage), immediately stop pipetting. Con-
sult the 'Troubleshooting' section of this
manual (see page 36), and contact the
manufacturer if needed.