Maintenance; Safety-Relevant Information; Functional Check; Table Of Functional Checks - Steelcase Migration SE Manuel D'utilisation

Masquer les pouces Voir aussi pour Migration SE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
_______________________________________________________________
7

Maintenance

7.1 Safety-relevant information

Only appropriately qualified and
authorised personnel may carry out
maintenance and repair work.
Only use suitable tools for all these
operations.
A damaged mains cable must be replaced
by the manufacturer, the manufacturer's
customer service staff or similarly
qualified personnel to prevent hazards.

7.3 Table of functional checks

Interval
Inspection point
During assembly
Frame parts
Before each
Immediate
environment of the
height adjustment
desk
Desktop
Regularly
Connections of the
electrical supply lines
(cables)
Insulation of the
electrical supply lines
(cables)
Surroundings of the
electrical supply lines
(cables)
Table
7-1: Functional checks
153310

7.2 Functional check

The components of the Migration SE Desk &
Bench product should be checked for correct
functionality at regular intervals. Pay particular
attention to the electrical connections:
Functional check
Position of the desktop
cross-member
Check safety distance
Check for horizontal
alignment
Check the insulation for
damage
Check the insulation for
damage
Check clearance to hot
objects (e.g. radiators)
The electrical equipment of the desk must
be checked regularly. Rectify defects such
as loose connections or damaged cables
immediately.
Attach or detach connectors only when
the equipment is de-energised.
The plug of the desk must be easily
accessible at all times.
Required condition
Measure (if required)
Desktop cross-
member completely
inserted in the guides
and firmly bolted
No objects in the
lifting range
Horizontal
No damage
No damage
Sufficient distance
Maintenance
Loosen the screws, insert
the desktop cross-
member correctly and
firmly tighten the screws
Remove any objects
Align using the adjusting
screws on the feet
Replace the connections
Replace the cables
Establish distance
19

Publicité

Table des Matières
loading

Table des Matières