Maintenance; Safety-Relevant Information; Functional Check; Exclusion Of Liability - Steelcase FlipTop Twin Manuel D'utilisation

_______________________________________________________________
6

Maintenance

6.1 Safety-relevant
information
Only appropriately qualified and
authorised personnel may carry out
maintenance and repair work.
Only use suitable tools for these
operations!

6.2 Functional check

The FlipTop Twin conference table/training room
table has to be checked for correct functionality at
regular intervals.
Inte Inspection Functional
rval point check
Regu- FlipTop Twin Position and
fastening attachment
larly
elements
-||- At the Check
underside of position and
the tabletop, fixation of
at the locking tabletop
and unlocking
mechanism
Table 6-1: Functional check
6.3 Maintenance
Only authorised and qualified personnel may carry
out maintenance work. Please contact our
Customer Service Department in this regard (see
Repairs and spare parts on page 14
Risk of injury or damage!
The fastening screws could tear out when
lifting the conference table at the tabletop
or at the attached components.
 Always take hold of the conference
table / training room table at the
underframe to transport or move it.
12
Required Measure
(if
condition
required)
All fastening
Correctly
elements
attach
are fixed at
fastening
the correct
elements;
position; all
tighten
screws are
screws
tight
Tabletop Correctly
has to be position
locked in tabletop
place in end and
position properly
lock it
).
ATTENTION
The use of non-approved spare parts
can cause damage to the conference
table / training room table.
Only components provided by

Steelcase may be used as spare parts.
Coordinate the installation of differing
parts with Steelcase.
Comply with the stated

maintenance and inspection
intervals.

6.3.1 Exclusion of liability

Steelcase assumes no liability or warranty in the
Liability on page 2
following cases (see
■ Inadequate monitoring of the product
components (functional checks)
■ Improper maintenance
■ Maintenance performed by third parties
■ Maintenance performed by unqualified and
unauthorised personnel
■ Use of components and adaptations that do not
originate from Steelcase
■ Unauthorised changes to the product with
regard to its design and configuration
■ Intentional misuse
■ Improper use (see

6.3.2 Cleaning and care

ATTENTION
Aggressive cleaning agents may cause
product damage or discolouration.

Only use polishing and cleaning
agents that are suitable for the
respective materials (wood, plastics,
metals, etc.).
Commercially available household cleaning

agents can be used to clean the surfaces of the
conference table / training room table.
Maintenance
):
Intended use on page 3
156562
)