Altrex Everest Manuel De Montage Et D'utilisation page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
3) Not covered by the warranty are any defects that occur as a result of the following:
a)
Use of the product contrary to its intended use or contrary to the instructions for use.
b)
Normal wear and tear.
c)
Assembly or repair by the client or by third parties (with the exception of fitting the spare parts provided by Altrex
indicated above under point 2).
d)
Any modified governmental regulations concerning the nature or quality of the material used in the product.
4) Any defects that are found upon the delivery of the product should be reported immediately to Altrex. Should notification of
these defects not take place immediately, the warranty will be null and void. To make a claim under the warranty, Altrex or your
Altrex dealer has to be provided with the proof of purchase.
5) Any defects of the product have to be reported to Altrex or your Altrex dealer as soon as possible, but in any case within 14 days
of the defect being found.
6) a)
Should a claim be made under the warranty conditions, Altrex has to have the opportunity to be able to investigate
the product in its Quality Centre. The client must make the product available for this purpose. Should it be
established during the investigation that the product has been used incorrectly, the costs of the investigation will be
charged to the client.
b)
Should the client ask for an investigation to be carried out by an independent institute, the costs for this investigation are
at the expense of the client should it be established during the investigation that the product has been used incorrectly.
The costs of the investigation are also at the expense of the client if, prior to this investigation, Altrex offered to repair or
replace the product at no charge to the client.
24 / 32
"#!
!

Publicité

Table des Matières
loading

Table des Matières