Starting-Up; Brake Working Instructions (Option); Powercompact Microprocessor Instructions - Nordcap M1 Mode D'emploi


Children should be supervised to ensure that they do not play with the device.

Avoid as much as possible the opening of doors;

When placing
guarantee that they are lower that the symbol ---
 Do not place heated foods inside the cabinet;
 Cover the foods with a protection to avoid damaging the evaporator.
 Do not load the shelves with more than its maximum load capacity (40 Kg).
 Do not use pointed objects to remove ice - that could damage the evaporator and be dangerous to health and environment;
 If you do not fallow the advises above, there will be an increase of electrical energy.
4.1 - Starting- up
Ensure that the plug has been introduced correctly into the socket or that the switch for the cupboard has been connected.
Then connect the cabinet, which involves – see also the enclosed electronic controller data sheet:
 Press button "B", the display will flash for a few seconds until it indicates the inside temperature.
 Temperature regulation is carried out automatically by electronic thermostat "A".
 The switch "C" switches the ventilation on and off (only on M3 Confectinery Cabinet).
4.2 – Brake working instructions (option)

4.3. Powercompact microprocessor instructions

4.3.1 Definitions
Set Point – The lowest temperature in ºC inside the cabinet.
Differential – Interval of temperature in ºC for the working of the cabinet.
TMPF55A.TMP
TEC
INSTRUCTIONS MANUAL
foods, ensure that there is good natural air circulation inside the cupboard – it's necessary to
v---v---
A – ELECTRONIC CONTROLLER - Termostat
B. - ON / OFF – Switch On / Switch Off
Brake
St
Rd
;
– SET POINT
- Differential
N.º
TMPF55A.TMP
Release the brake
10/40