Table des Matières
Publicité
Tools Required / Outiles Utiles /
Herramientas Útiles
3 mm
8 mm / ⁵⁄₁₆"
2
27 mm
10 mm
27 mm
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This unit must be used with with showerpipe
rough set 16181181.
• To guarantee the smooth running of the thermo-
stat, it is necessary from time to time to turn the
thermostat from total hot to total cold.
• The mixer is equipped with check valves. The
check valves must be checked regularly (at least
once a year) to insure reliable service of the
mixer and to protect the drinking water supply
from backflow. If the check valves are dirty or
worn, they must be replaced.
• For use with shower heads rated at 9.5l/
min (2.5gpm) or higher.
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
5.8 GPM
Publicité
Table des Matières
