Installation Instructions: Electrical System for Towing Hitch
Vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation.
20.
Lay the brown/white wire from the 7-pin of the towed vehicle module (fig. 1/2) to the control
unit of the APS and connect.
Note
If you have any questions, please contact the next specialist Renault garage
Checking correct operation
21.
Reconnect the ground of the vehicle's battery.
22.
Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
23.
Secure all cables using cable ties.
24.
Refit any parts removed for installation.
Renault Kangoo
316 123 391 101-23/02
21