LaserLiner Cubus Mode D'emploi page 15

The ADS does not activate the monitoring function until 30 seconds
!
after the laser levelling procedure has been completed (set-up phase).
The tilt LED flashes every second during the set-up phase, rapid
flashing, when ADS is active.
ADS function
ON
Adjustment phase
Sensor Automatic
Transport LOCK: The device is protected by a special motor
brake during transport.
IP 66
The device characterised by specific protection against
dustand rain.
Space grids: These show the laser planes and functions.
auto: Automatic alignment / man: Manual alignment
auto
Horizontal
levelling
Rotation
begins
ADS activation:
press the tilt
button; the tilt
LED flashes every
second.
auto man
Vertical Inclined plane
levelling
Cubus / Cubus G
ADS active after
30 seconds, rapid
flashing of the
tilt LED.
90° angle
External
influence
The
laser
remains stationary as
a precaution, the laser
flashes and the tilt
LED is lit continuously.
90° reference
function
15
EN