General Safety Instructions - LaserLiner Cubus Mode D'emploi

Completely read through the operating instructions, the "Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Fully automatic rotary laser with red or green laser technology
– 90° reference beam to align partitions
– Laser modes: spot, scan, rotary and hand receiver mode
– All functions can be controlled remotely.
– SensoLite 110: Laser receiver range up to 100 m radius
– Accuracy 0.15 mm / m, 4° self-levelling range

General safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
Cubus / Cubus G
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014
13
EN