Ec Declaration Of Conformity - Evolution R165CCSL Notice Originale

EC DECLARATION OF CONFORMITY

The manufacturer of the product covered by this Declaration is:
UK: Evolution Power Tools Ltd, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS, 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where applicable,
fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC. Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive.
2011/65/EU. & The Restriction of the Use of certain Hazardous
2015/863/EU.
Substances in Electrical Equipment (RoHS) Directive.
2012/19/EU.
The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents:
EN 62841-1:2015 • EN62841-2-5:2014 • EN 55014-1:2017+A11:2020 • EN 55014-2:2015 •
EN 61000-3-2: 2014(220-240V models)• EN IEC 61000-3-2:2019(220-240V models) •
EN 61000-3-3:2013+A1:2019(only 026-0001) •
EN 61000-3-11: 2000 (220-240V models except 026-0001)
Product Details
R165CCSL 165mm (6-1/2") Circular Saw
Description:
Model No: 026-0001 / 026-0002 / 026-0003
R185CCS 185mm (7-1/4") Circular Saw
Description:
Model No: 027-0001C / 027-0002C / 027-0003C
R185CCSX 185mm (7-1/4") Circular Saw
Description:
Model No: 027-0001 / 027-0002 / 027-0003
R185CCSX+ 185mm (7-1/4") Circular Saw
Description:
Model No: 027-0001A / 027-0003A / 027-0003A
Brand Name: EVOLUTION POWER TOOLS LIMITED
Voltages: 220-240V / 110V ~ 50Hz
Input: R165CCSL - 1200W
R185CCS, R185CCSX & R185CCSX+ - 1600W
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities,
and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
UK: Evolution Power Tools Ltd, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS, 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
www.evolutionpowertools.com
Print: Barry Bloomer
Supply Chain & Procurement Director
01/06/18
30