Optional Accessories - Makita DFL650F Manuel D'instruction

NOTE:
Hold the tool with its square drive pointed straight
•
at the bolt or nut, or the bolt or nut will be
damaged.
Limits of fastening capacity
Use the tool within the limits of fastening capacity. If you
use the tool beyond the limits, the clutch does not work.
And the tool cannot deliver enough fastening torque.
DFL650F with battery BL1815
Range of fastening capacity
360
300
240
180
120
60
30
25
(18)
Torque
015600
DFL650F with battery BL1815N, BL1820, BL1820B, BL1830,
BL1830B, BL1840, BL1840B, BL1850, BL1850B or BL1860B.
Range of fastening capacity
360
300
240
180
120
60
30
25
(18)
Torque
015799
NOTE:
The revolution angle means the angle which a
•
screw/bolt revolves when the tool attains to 100%
from 50% of desired torque.
Use of a low temperature conditioned battery
•
cartridge may sometimes give warning for battery
cartridge capacity by warning lamp and beeper
which makes the tool stop immediately. In this
case, the range of fastening capacity may be
inferior to those shown in the above even if a
charged battery cartridge is used.
50 58 58
(37) (43)
N m (ft lbs)
65
(48)
N m (ft lbs)
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita genuine batteries and chargers
•
Anti kickback attachment
•
Protector (Yellow, Blue, Red, Clear, Black)
•
Adjusting grip
•
Spindle complete 12.7 (1/2")
•
Plate complete
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
or attachments
Only use accessory or
are