Dometic CRX50 Instructions De Montage Et De Service page 20

Installing and connecting the refrigerator
A
NOTICE!
• The cooling device can withstand a short term inclination of 30°, for
example on boats. When setting up the refrigerator, note that it must
be fastened to take account of this. If you have any questions regard-
ing installation, consult your specialist dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 8, page 6).
• The appliance is designed for ambient temperatures between
+16 °C (61 °F) and +43 °C (109 °F).
• CRX110ACDC, CRX140ACDC: In winter mode the appliance can be
operated at ambient temperatures between +10 °C (50 °F) and
+16 °C (61 °F).
7.2 Notes on installing the refrigerator
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 8, page 6).
Key for fig. 8, page 6
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient air to circulate
above or at the side.
Observe the following installation dimensions:
Model Dimensions W x H x D (mm)
CRX50 390 x 544 x 550
CRX65 458 x 535 x 595
CRX80 485 x 650 x 578
CRX110 530 x 755 x 608
CRX140 550 x 825 x 670
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
20
Dimensions W x H x D (inch)
15.35 x 21.42 x 21.65
18.03 x 21.06 x 23.43
19.09 x 25.59 x 22.76
20.87 x 29.72 x 23.94
21.65 x 32.48 x 26.38
CRX
EN