Coffee Grinder CM 90
Press and hold down the 'UN-
■
LOCK' button at the rear of the
motor base and with the other
EN
hand turn the grind adjustment
collar anti-clockwise until the
graphic arrow on the collar is
aligned with the arrow on the
motor base.
■
Lift out the top burr from the
grind adjustment collar using
the handle. Clean using the burr-
cleaning brush.
■
Lift the grind adjustment collar
away from the motor base and
clean with the brush.
28
Clean the bottom burr using the
■
burrcleaning brush.
■
Once both burrs are cleaned, re-
turn the grind adjustment collar
to its position in the motor base.
■
With the grind adjustment collar
in hand align the arrow on the
collar with the arrow on the rear
of the motor base, press downl.
Replace the top burr back into
■
position in the grind adjustment
collar and turn clockwise to the
desired grind setting.