Cleaning And Care - Graef CM 90 Notice D'utilisation

Coffee Grinder CM 90
Flip the switch to the 'Auto' po-
‹
sition.
EN
On the control panel, press and
‹
hold the program P button for
a period of 1 second - all three
buttons will flash once indicat-
ing you have activated program
mode. Remove your finger from
the program P button. The pro-
gram P button will stay fully illu-
minated, while the 1 cup button
and 2 cup buttons will soften in
brightness.
note
The programming mode can be
aborted at any stage by pressing
the program P button again.
Select either the 1 cup or 2 cup
‹
button to program the grind
time for that selected button.
The selected button will begin
to flash, and the motor will be-
come activated. Ground coffee
will begin to deliver into the
group handle.
To stop the coffee grind and set
‹
your programmed 1 or 2 cup
grind measurement, re-select
the 1 or 2 cup button that was
previously selected (this is indi-
cated by the flashing button).
The motor will be de-activated,
and the time of the selected 1
26
or 2 cup function will be stored.
note
Allowable program time for
►
1 cup and 2 cup buttons is 2
sec – 40 sec..

Cleaning and Care

This chapter provides you with im-
portant information on cleaning
and caring for the unit.
Safety instructions
CAUTION
Follow the safety instructions
below before you start cleaning
the unit:
Switch off the appliance and
►
disconnect from supply before
changing accessories or ap-
proaching parts that move in
use.
Let the unit cool off before
►
cleaning.
Do not use any aggressive or
►
abrasive cleaning agents and
do not use any solvents.
Do not scratch off stubborn
►
soiling with hard objects.
► Make sure that no liquid gets
into the interior of the unit.
► Do not put the unit in the
dishwasher and do not hold it
under flowing water.
Cleaning
Old coffee remains in the unit can
lead to oxidation. That spoils the