Cleaning & Maintenance - Brandt BO-1409 Manuel D'instructions

C. Disconnecting the kettle and service
1. Alter boiling the water, the kettle is automatically disconnected and the light goes off.
2. If you wish to disconnect the kettle prior to automatic disconnection, move switch to the "0"
position.
3. You may now remove the kettle from its base and serve the water.
Use only the handle to pour the water.
4/ CLEANING & MAINTENANCE
A. Cleaning
1. Before cleaning, unplug the connection base and allow the kettle to cool down.
2. Do not submerge the connection base or the kettle in water.
3. Clean the outside of the kettle and the connection base with a slightly damp cloth,
ensuring that the electrical components remain dry.
4. Do not use abrasive or degreasing agents.
To prevent particles of lime from becoming detached in the liquid, the kettle incorporates
a lime filter. To clean it, remove it by pulling upwards. Clean the filter by rinsing it under
the tap and use a soft brush to remove any lime which has become.
B. Caring
1. Half fill the kettle with tap water and add the juice of 1 lemon to the water.
2. Boil this mixture and allow it to stand for 15 minutes. Re-boil the mixture and allow it to stand a
further 15 minutes. Re-boil this mixture a third time then rinse the kettle well.
C. Decalcification
After a period of time, calcareous deposits accumulate on the inside of the kettle. This is normal,
although an excessive amount of lime may affect the proper functioning of the kettle. If this should
occur, use a commercially-available decalcifying solution. Never try to decalcify the kettle by chipping
away or scratching.
D. Warranty and after-sale service
This product is covered by a 2-year warranty by your retailer. For more details, please refer to the
warranty conditions supplied by your distributor.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 Euros- Head Office: 7
rue Henri Becquerel - 92500 Rueil-Malmaison - RCS Nanterre 440 303 196
11