Replacing The Remote Control's Batteries - Grohe Sensia ARENA 39354SH1 Manuel Utilisateur

Inserting the Battery for First Time
1. Insert 2-AAA batteries in the remote control.
2. [WELCOME] will be displayed for 2 seconds, and GROHE logo will blink in blue color 3 times.
* Turn-on the toilet when [DURING THE POWER-OFF. PRESS THE POWER BUTTON] is displayed. It will be
displayed when the toilet is power-off.
3. [TO PAIR, BRING REMOTE NEAR TO TOILET AND PRESS OK] will be displayed. Take the remote control
close to the toilet and press "OK".
4. When the pairing is completed, [SUCCESS] will be displayed, and GROHE logo will blink in blue color 3 times.
5. Press any buttons to return to the home screen.
* Press any buttons on the back of the remote to turn-on the back screen. If there is no operation of buttons on
the back for 30 seconds, back screen will turn-off automatically.

Replacing the remote control's batteries

Replace the batteries with new ones when the
THE BATTERY] displayed on the back screen. None of the buttons will work while the messages are displayed.
1. Detach the remote control from the holder.
2. Remove the back cover and replace the old batteries with two new 1.5V AAA alkaline batteries.
3. Reattach the back cover and replace the remote control in the holder.
NOTE:
• The logo blinks in orange color when the battery level reaches 20%, and red when the battery level
reaches 10%.
logo blinks in orange or red color, with the message [REPLACE
59
Introduction