Télécharger Imprimer la page

deante 1BT Manuel D'installation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
EN
INSTALLATION
• Before making any inlet pipe connections, all
supply pipes must be throughly flushed to remo-
ve debris. Failing to do this may cause demage
of the cartridge or low water flow.
• The place and way of installation needs to
ensure free access to any possible dismantling
and a possibility of carrying out maintenance or
repair activities.
• The mixer should be installed by a persons with
appropriate qualifications. Any possible damage
caused as a result of unprofessional assembly or
maintenance is not covered by warranty.
• Mixer installation should be carried out using all
original components included in the product and
supplied by the producer.
• To purchase parts, contact producer via
zamienne@deante.pl
• In order to ensure long and reliable use of the
tap it is required to apply ball valves with a filter
with regard to standing taps or seals with stra-
iners with regard to wall taps.
• Flexible hoses must not be bent or twisted. Ho-
ses may only be screwed into the fitting by hand.
• Mixers are intended for indoor installation. Do
not allow the mixer or water inside to freeze.
• It is recommended to turn off the main water
valve during long absence.
• Do not leave the mixer unattended during a
pressure test.
• It is not advisable to use a thermostatic tap with
flow gas and electric water heaters.
Requirements for taps other than thermo-
static taps:
/4
www.deante.pl
www.deante.pl
Requirements for thermostatic taps:
MAINTENANCE
A user is obliged to clean the following on a re-
gular basis: aerator, ball valves with a filter, tap's
surface, to check connections of hoses, filters.
Recommendation:
• Use a soft cloth
• Do not use chlorine or alcohol based cleaner,
strong acids, bases or solvents
• Do not use cleaner with cleaning beads
• Use biodegradable cleaning agents with a deli-
cate structure based on fruit acids, ie recommen-
ded Deante agents.
• Mixer should be at the room temperature during
cleaning
• After cleaning, rinse the washed surface thoro-
ughly to get rid off residual chemicals and wipe
dry.
• Do not use high pressure or steam cleaners
Details of the warranty on www.deante.eu
MIXER MODELS
I - Standing model with a pull-apart spout
II - Wall model
III - Standing model
IV, V, VI - Flush-mounted model
VII, VIII - Standing multi-hole model
www.deante.eu
www.deante.eu

Publicité

loading

Ce manuel est également adapté pour:

4at4bt