Schweighofer MODSTER CURARE 60 Manuel D'utilisation Et Consignes De Sécurité page 11

modellsport
schweighofer.
CAUTION: Do not leave remote controls unattended in order to avoid an operation by third parties!
CAUTION: For the battery pack might get hot during the charging process, the battery pack may NEVER be char-
ged while being inside of the model but only on a ceramic, fireproof basis or on top of tiles.
CAUTION: The battery pack may never be charged unsupervised.
CAUTION: Before start-up you need to ensure that there are neither microwaves nor wireless-LAN systems or
devices in operation for they might cause interferences.
Warnings:
Non re-chargeable batteries may not be charged! Do not use unequal battery types or new and
used batteries combined! Only use recommended batteries or those of an equal type! Mind the
batteries' polarity when inserting them! Remove the batteries in case of a longer non-use. Make
sure that you do not cause short-circuit of the battery contacts! Failure in doing so may result in
intense heating or fire! Do not throw the batteries into fire!
Disposal Instructions:
As consumer you are lawfully required to professionally dispose used batteries or to return them!
Deliver any batteries that are marked with the recycling sign and the struck through dustbin at pu-
blic collection points in your community or return them to places where batteries of that respective
type are being sold. This product contains valuable raw materials which can be recycled. Therefo-
re, please deliver this product to a collection point in your city or community.
CAUTION:
We as manufacturer may not be held responsible for any damages that might be caused by incorrect assembly
and improper usage.
Routine Tests before Take-Off
In case you are sharing the airfield area with several other model sport enthusiasts, you need to ensure that you
are the only one who is sending on your channel before you turn on your transmitter.
• Always pull out the transmitter's antenna (not necessary if using a 2.4 GHz transmitter) and check for tightness.
• Before turning your transmitter on ensure that the throttle stick is being set to stop / neutral.
• Has the correct model memory been chosen?
• Always turn the transmitter on first and the receiver thereafter.
• Execute a range check before take-off.
• Execute a function test. Also check the machine direction and the model's servo control movement.
• Are combined functions and switches configured correctly?
• Is the battery's charge condition sufficient?
• In case of doubts, do not launch the model!
• Always turn off the receiver first and the transmitter thereafter.
www.der-schweighofer.com 11