INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
HUDORA Flitzkids 2.0
Item number:
11054, 11062, 11063
Item weight:
approx. 2 kg
Dimensions when assembled:
approx. 59 x 28 x 66 cm
Maximum user weight:
50 kg
Purpose:
Roller scooter for playful learning of rolling lo-
comotion.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
1 x Body of the scooter | 1 x Handlebar | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not requi-
red for the installation and use of the product.
SAFETY INSTRUCTIONS
• This product has been designed for children aged from 2 to 6 years and is
suitable only for smooth, paved surfaces. Do not use it on public roads.
• The scooter is to be used by one person at a time.
• Note the maximum user weight indicated in Technical Specifications.
• Please ensure that your child wears the appropriate protective clothing (hel-
met, hand- / wrist-, elbow- and knee pads) and does not ride the scooter
without shoes.
• Do not allow your child to ride at dusk, at night or in poor light conditions. So
that your child and others are not endangered, do not allow your child to ride
on roads and in thoroughfares, on slopes and hillsides. Avoid riding close to
stairs and open waters.
• The functions of self-securing screw threads can be impaired after repea-
ted loosening and tightening of the connecting elements. Check the scooter
before every ride to make sure that all parts are still fixed correctly and the
scooter works as it should.
• Pay attention that your child keeps both hands tightly on the handlebar
to have control over the scooter.
• The scooter should not be used on sensitive surfaces. Such areas should,
where expedient, be covered with old carpets.
• Warnings! Protective equipment should be worn. Not to be used in traffic.
50 kg max.
• The brakes may become hot, if the scooter has been used for a while! Avoid
touching them during and after use until they have cooled down.
• The use of the product requires specific skills and knowledge to be able to
avoid injury to the user and third parties through a crash or collision.
• Always supervise your child when using the product!
• This product contains small parts which could cause asphyxia if swallowed.
Supervise children during the assembly. This product must be assembled
by an adult. Children should only use the product when they are under adult
supervision.
INSTRUCTIONS ON ASSEMBLY
The scooter will be delivered to you in 2 parts (body and handlebar) (Fig. 1).
You will have to proceed as follows in order to set up the scooter for use:
Press in the safety push button at the lower end of the handlebar and push the
handlebar such that the handlebar is aligned in the envisaged opening on the
scooter body, with the logo to the front while riding. You will hear a click, when
the safety pushbutton locks into place (Fig 2). To adjust the handlebar height
open the quick release (Fig. 3). If necessary, press the safety push button (Fig.
4) and pull the handlebar stem with the grips upwards or else push it down until
All images are examples of the design.
the safety push button snaps into place at the desired position. Close the quick
release in such a position again. If necessary, turn the nut on the quick release
clamp to tighten more firmly, in the event that you have not been able to achieve
a satisfactory fixation.
You will have to proceed as follows in order to again transform
the scooter into a transport state:
Press the safety push button from the bottom side of the deck (Fig. 5), so that you
can pull out the handlebar. (Fig. 6)
USAGE INSTRUCTIONS
DRIVING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off. Braking is no problem
either - simply step on the friction brake over the back wheel (mudguard).
ADJUSTMENT OF THE STEERING CONTROL
The steering of this scooter works through weight shift. In the case of very young
children, it may be useful to completely block the steering. Thus the small no-
vice rider can concentrate solely on the propulsion and the basic movement. In
order to change the direction of travel, the scooter must be raised slightly and
realigned. 2 fuse blocks are mounted on the underside of the front axle between
the rollers (Fig. 7). In the delivery condition they are stuck on the outside of the
axle carrier. Through slight lifting, lateral movement and the reset in the teeth
the blocks can be completely moved into the middle. In the middle position they
block the steering. Please exclusively use either the total steering block or the
entirely open steering. You should in any case explain the changed steering func-
tion to the child.
CARE AND MAINTENANCE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone. For your own safety,
please use original spare parts only. These can be sourced from HUDORA. Do
not make any structural changes. If parts become damaged or if sharp edges or
corners should develop, the product may not be used any more. If in any doubt,
please contact our service team (http://www.hudora.de/service/).
BEARINGS
Your kick scooter is equipped with precision ball bearings, which were filled with
grease under high pressure, during manufacture. For this reason, the rollers of
the kick scooter only run lightly and swiftly, while under load. Bearings are
maintenance-free, but they are wear parts. Caution! Worn bearings make
conspicuous audible noises and their function is constrained. In order to maintain
optimal riding pleasure and to ensure lasting safety, you should replace bearings,
as soon as they begin to exhibit signs of being worn. In the case of full load and
daily use we recommend the replacement of the rollers and bearings twice a
year. Bearings are available as accessories under http://www.hudora.de/.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service/.
4/8