hager S771-22X Guide D'installation page 118

Introduction
• System status feedback: for controlling an electrical
appliance or lighting depending on alarm system sta-
tus, with activation throughout Part Set or Total Arm
status operating time and de-activation as soon as the
system is disarmed.
Electrical
appliance activation
(control panel retransmis-
sion)
System Part Setting
or Total Arming
)
)
)
)
)
G
B
These applications require external receiver programming (see "Programming" chapter).
Electrical
appliance de-activation
(control panel retransmis-
sion)
System Total Disarm
)
)
)
)
)
• Activation on intrusion: for controlling an electrical
appliance or lighting when the alarm system is trig-
gered, with activation on intrusion and de-activation
after a programmed time limit.
Electrical
appliance activation
Alarm system triggering
)
)
)
)
)
118
Electrical
appliance de-activation
• At the end of the
programmed time limit
• When the "Disarm" key
is pressed.
E.g. Flash
)
)
)
)
)