LENCO BT-200 Light Mode D'emploi page 12

N. Trouble Shooting
No power
No sound
No response from
speaker
Not able to pair unit
(standaloneor
afterinterconnected)
with phone
Unit hang
O. Specifications
Dimensions
Weight
Bluetooth
Built-In Battery
Power Source Input
Audio
NFC Connect
Operating Temperature -5 to 45°C
•
Check the battery whether it is charged enough.
•
Check whether the device is powered OFF.
•
Check whether the volume level is in the lowest
position on your Bluetooth speaker and mobile
device.
•
Make sure that your Bluetooth device is within
the effective operation range.
•
Check whether the Bluetooth device is paired.
•
Check whether the Bluetooth device shows that
it's connected.
•
Check if you have selected the correct audio
source.
•
Restart the speaker by power it Off and On again.
•
Choose a sharp object and put it into "reset(11)"
to reset the unit.
•
Remove the history of the BT-200 Light from your
mobile device and start a new search and new
pairing again.
•
Under the
discharge and radio interference field, the sample
may malfunction and need user reset to recover
sometimes.
200 mm (L) x 45 mm (D) x 100 mm (H)
535g
Specification
Supported Profile
Connection Distance
Interconnection
Distance(between
two units)
Lithium 3.7V 3500mAh
Battery charge time: 6hours, Playing Time: 7
hours approximately
(at max.100% of volume setting)
Micro USB Port
DC 5V, 1A
Output Power: 2*5W
Frequency Responses:60HZ-20KHz
For Bluetooth pair
11
environment with
Dual channel,
interconnection
A2DP, AVRCP
In 10 meters (open area)
In 5meters(no
obstruction)
5W (RMS) x 2 (4 Ohm)
60Hz to 20KHz
electrostatic