Operation; Basic Operation; Power; Switching The Monitor's Picture - Kenwood LZ-7500 Mode D'emploi

Operation

Basic Operation

W D F U L L
V O L
S P N O R M A L
WIDE MODE
;;; yyy
Screen Mode
• NORMAL
;;; yyy
• JUST
V S V D 1
A V N O R M A L
V.SEL down
yyy ;;;
• FULL
yyy ;;;
;;;
• ZOOM
;;;

Power

Turning on the power
Press the [V.SEL] button.
Turning off the power (Stand by mode)
Press the [V.SEL] button for at least 1 second.
Switching the Monitor's Picture <VS>
Press the [V.SEL] button.
Each time the button is pressed the monitor's picture
switches as follows:
Display
"NAV"
"VD1"
up
"VD2"
"CAM"
For "NAV", "VD" and "CAMERA/VIDEO" setting, refer to
<System Setup Screen> (Page 5).
You cannot view video pictures whilst the vehicle is moving. To
enjoy video pictures, find a safe place to park and engage the
parking brake.
Volume <VOL>
Increasing Volume:
Press the [up] button.
Decreasing Volume:
Press the [down] button.
Switching the Video Screen Mode <WD>
Press the [WIDE MODE] button.
Each time the button is pressed the screen mode
switches as follows:
Display
"FULL"
"ZOOM"
"JUST"
"NORMAL"
You cannot operate when the navigation picture is displayed.
Switching the Speaker Mode <SP>
Press the [WIDE MODE] button for at least 1 second.
Each time the button is pressed for at least 1 second the
built-in speaker mode switches as follows:
Display
"NORMAL"
"NAV"
"VIDEO1"
"VIDEO2"
"OFF"
Picture
Navigation (During "NAV" set to "RGB" or
"AV IN1")
Video 1 (During "VD1" set to "AV-IN1")
Video 2 (During "VD2" set to "AV-IN2")
Video 3 (During "CAMERA/VIDEO" set to
"VD")
Setting
Full screen mode
Zoom screen mode
Just screen mode
Normal screen mode
Setting
Sound with monitor picture
Sound with navigation picture
Sound with video 1 picture
Sound with video 2 picture
Built-in speaker is turned off
English - 3