Cutting Curves; Cutting With A Template, Handling Shaped Work; Cutting Circular Work; Fixtures - Zipper Maschinen ZI-BAS205 Mode D'emploi

OPERATION

17.3.5 Cutting Curves

When cutting curves, pay particular attention to the width of the saw blade. Choose a narrow band
saw blade with which you can cut even the smallest radii in your workpiece. Work at a low feed rate
so that you do not push the workpiece sideways out of the cutting line.

17.3.6 Cutting with a template, handling shaped work

Working with a template

17.3.7 Cutting circular work

17.3.8 Fixtures

Fixture without workpiece
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BAS205 / ZI-BAS25050
Correct handling of moulded parts
To cut round slices, use a circular cutting
device as shown in the illustrations on the left
and below!
Operator placing workpiece fixture
50