Caution On Lithium-Ion Battery - Hitachi WH 14DMR Mode D'emploi

English

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips
with the protection function to stop the output.
In the cases of 1 and 2 described below, when using
this product, even if you are pulling the switch, the
motor may stop. This is not the trouble but the result
of protection function.
SPECIFICATIONS
Cordless Impact Driver
Model
Voltage
No-Load speed Power mode
Save mode
Capacity (Ordinary bolt)
Tightening torque Power mode
(Maximum)
Save mode
2.0 Ah
2.6 Ah
Rechargeable battery
3.0 Ah
3.3 Ah
Weight
Cordless Impact Wrench
Model
Voltage
No-Load speed Power mode
Save mode
Capacity (Ordinary bolt)
Tightening torque Power mode
(Maximum)
Save mode
2.0 Ah
2.6 Ah
Rechargeable battery
3.0 Ah
3.3 Ah
Weight
Charger
Model
Charging voltage
Charging time
Weight
Charge time is approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.
5
WH14DMR
EB14B:Ni-Cd (12 cells)
EB1426H: Ni-MH (12 cells)
EB1430H: Ni-MH (12 cells)
EB1433X: Ni-MH (12 cells)
1.8 Kg
WR14DMR
EB14B:Ni-Cd (12 cells)
EB1426H: Ni-MH (12 cells)
EB1430H: Ni-MH (12 cells)
EB1433X: Ni-MH (12 cells)
1.8 Kg
UC14YFA
7.2 – 14.4 V
2.0 Ah : Ni-Cd 50 min.
2.6 Ah : Ni-MH 65 min.
3.0 Ah : Ni-MH 70 min.
3.3 Ah : Ni-MH 75 min.
3.0 Ah : Li-ion
0.6 Kg
1. When the battery power remaining runs out (The
battery voltage drops to about 12V (WH18DL,
WR18DL) / about 8V (WH14DL, WR14DL)), the
motor stops.
In such case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In
this case, release the switch of tool and eliminate
causes of overloading. After that, you can use it
again.
WH14DL
14.4V
0 – 2600 min
0 – 2000 min
M6 – M14
140 N·m
75 N·m
x EB1820L: Ni-Cd (15 cells)
x EB1826H: Ni-MH (15 cells)
BCL1430: Li-ion (4 or 8 cells)
EBL1430: Li-ion (4 cells) EB1830H: Ni-MH (15 cells) EBM1830: Li-ion (10 cells)
EBM1430: Li-ion (8 cells)
x EB1833X: Ni-MH (15 cells)
1.5 Kg
WR14DL
14.4V
0 – 2600 min
0 – 2000 min
M10 – M16
200 N·m
110 N·m
x EB1820L: Ni-Cd (15 cells)
x EB1826H: Ni-MH (15 cells)
BCL1430: Li-ion (4 or 8 cells)
EBL1430: Li-ion (4 cells) EB1830H: Ni-MH (15 cells) EBM1830: Li-ion (10 cells)
EBM1430: Li-ion (8 cells)
x EB1833X: Ni-MH (15 cells)
1.5 Kg
UC24YFA
7.2 – 24 V
50 min.
65 min.
70 min.
75 min.
x x
0.6 Kg
WH18DMR WH18DL
18V
-1
-1
150 N·m
80 N·m
x
x
x
2.0 Kg 1.6 Kg
WR18DMR WR18DL
18V
-1
-1
220 N·m
120 N·m
x
x
x
2.0 Kg 1.6 Kg
UC18YG UC18YRL
7.2 – 18 V 7.2 – 18 V
50 min. 30 min.
x 40 min.
x 45 min.
x 50 min.
x 45 min.
0.3 Kg 0.6 Kg