Test The Installation - HP Scanjet N6310 Guide De Démarrage Rapide

Chapter 1

Test the installation

1. Place a single document page in the automatic document feeder (ADF).
2. Start a scan using the Scan (
Windows: If you installed the HP scanning software, select a scan shortcut, and then
press the Scan (
Macintosh: Press the Scan (
want is selected, and then press OK to start the scan.
3. Windows only: Start a scan using scanning software.
• If you are using the HP scanning software, double-click the HP Scanning icon on
your desktop, select a scan shortcut, and then click Scan....
• If you are using non-HP TWAIN- or ISIS-compliant software, scan from that
software.
If the scan does not proceed as expected, see Basic troubleshooting tips and Scanner
installation troubleshooting in the scanner user guide.
For information on uninstalling and reinstalling the HP scanning software, see "Uninstall
and then reinstall the HP scanning software" on page 24.
6 HP Scanjet N6310
).
) button.
) button, use and until the scan shortcut you