Oven And Accessories - Sharp R-244 Mode D'emploi

1 1
4
12
13. Turntable
(glass)
15. Coupling
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to
ensure that it is not damaged.
• Always operate the oven with the turntable and turntable support fitted correctly. This
promotes thorough, even cooking. A badly fitted turntable may rattle, may not rotate
properly and could cause damage to the oven.
• All food and containers of food are always placed on the turntable for cooking.
R-244_OM_WEST.indb 4

OVEN AND ACCESSORIES

6
2
3
7 8
10
5
11
14. Turntable
OVEN
1.
Door handle
2. Oven lamp
3. Door hinges
4.
Door safety latches
5.
Door
9
6. Door seals and sealing surfaces
7. Turntable motor shaft
8. Oven cavity
9.
Control panel
10. Waveguide cover (DO NOT REMOVE)
11. Power supply cord
12. Outer cabinet
ACCESSORIES:
Check to make sure that the following
accessories are provided:
(13) Turntable (14) Turntable support
(15) Coupling
Place the turntable support in the cen-
tre of the oven floor so that it can free-
ly rotate around the coupling. Then
place the turntable onto the turntable
support so that it locates firmly into
the coupling.
To avoid turntable damage, ensure
dishes and containers are lifted clear
of the turntable rim when removing
them from the oven.
NOTE: When you order accessories,
please mention two items: part name
and model name to your dealer or
support
SHARP authorised service agent.
GB-4
2017-06-09 08:42:24