CLEANING
WARNING:
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean
immediately with a damp cloth.
•
Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the enamel surface.
•
Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions.
IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals.
DESCRIPTION OF THE HOOD
1. Control panel - consisting of two keys
Light key
The light key has 2 positions (lights on or off).
To switch the light on: move the key right.
Suction power selection key
This key has several positions for the control of the suction power, based on the amount of steam the hood needs to remover from the environment.
To increase the suction power: move the key right.
2. Grease filter
3. Light cover
- Never use steam cleaning equipment.
- Disconnect the appliance from the power supply.
3
1
2
GB12
1 2 3