Safety Information; Important Safety Instructions - IKEA UNDANTAG Mode D'emploi

Masquer les pouces Voir aussi pour UNDANTAG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
Contents

Safety Information

Use
Product description
Control panel
Cleaning and maintenance
Safety Information
Before first use
Your safety and that of others is
paramount.
Remove cardboard protection
pieces, protective film and adhesive
labels from accessories.
Check the appliance for any
transport damage.
To avoid any damage do not place
any weights on the appliance.
Do not expose the appliance to
atmospheric agents.
This manual and the appliance itself
provide important safety warnings,
to be read and observed at all
times.
This is the attention symbol,
pertaining to safety, which
alerts users to potential risks to
themselves and others.
All safety warnings are preceded by
the attention symbol and the follow-
ing terms:
DANGER: indicates a
hazardous situation which, if not
avoided, will cause serious injury.
WARNING: Indicates a
hazardous situation which, if not
avoided, could cause serious injury.
4
What to do if ...
7
Technical data
8
Environmental concerns
8
IKEA Limited Guarantee
8
All safety warnings give specific
details of the potential danger/
warning present and indicate how
to reduce risk of injury, damage
and electric shock resulting from
improper use of the appliance.
Carefully observe the following
instructions.
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE
THESE INSTRUCTIONS
WARNING: TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE
THE
FOLLOWING:
Use this unit only in the manner
intended by the manufacturer. If
you have questions, contact the
manufacturer.
Before servicing or cleaning the
unit, switch power off at service
panel and lock the service
disconnecting means to prevent
power from being switched
on accidentally. When the service
disconnecting means cannot be
locked, securely fasten a
prominent warning device, such
as a tag to the service panel.
Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction.
ENGLISH
10
11
12
13

Publicité

Table des Matières
loading

Table des Matières