External Venting Dimensional Planning - Jennair JVD0303GS Instructions D'installation

Single Unit with 6" (15.2 cm) External Discharge
This configuration accommodates one or two 15" (38.1 cm)
■
cooktops, one on either or each side of the downdraft vent
intake.
Center Line of
Downdraft Inlet
A. 6
Option: Two Downdrafts with Single 8" (20.3 cm)
External Discharge
This configuration accommodates one or two 15" (38.1 cm)
■
cooktop(s) and a 30" (76.2 cm) or 36" (91.4 cm) cooktop.
As shown, the 30" (76.2 cm) or 36" (91.4 cm) (note: 30"
[76.2 cm] cooktop requirement shown, add 6" [15.2 cm] to
the 18 / " [46.1 cm] dimension for a 36" [91.4 cm] cooktop)
9
64
cooktop would be installed between downdraft vent intakes
and the 15" (38.1 cm) cooktop on the left side of the larger
cooktop.
A second 15" (38.1 cm) cooktop can be installed on the right
side of the 30" (76.2 cm) or 36" (91.4 cm) cooktop.
For a 30" (76.2 cm) or 36" (91.4 cm) cooktop and single 15"
■
(38.1 cm) cooktop on the right hand side of the cooktop, the
dimensions shown are to be applied in reverse.
Order Y-Transition Ducting Kit: W11180669
■
Top View
Center Line of
C
Downdraft Vent intake
E
F
Cutout Opening
Depth
45° 6" Elbow
NOTE: Configure blower motor assembly so that the control
panel is accessible from the front.
A. 33 / " (86 cm)
7
8
B. 34 / " (86.5 cm)
5
64
C. 15 / " (40 cm)
47
64
D. 18 / " (46.1 cm)
9
64
E. 6 / " (16.2 cm)
23
64

External Venting Dimensional Planning

A
Center Line of
Blower Discharge
/ " (16.2 cm)
23
32
A
B
Center Line of
D
Downdraft Vent Intake
G
H
Cutout Opening
Width
F. Center line of blower intake
G. Center line of Y ducting transition
H. 6" (15.2 cm) ducting to size
Option: Two Downdrafts with Single 8" (20.3 cm)
External Discharge
This configuration accommodates three 15" (38.1 cm)
■
cooktops, one between the downdraft vent intakes and one
on each side of the downdraft vent intakes.
Order Y-Transition Ducting Kit: W11180669
■
Center Line
Downdraft Vent Intake
Cutout Opening
Depth
Center line of
Blower Intake
Center Line of
Cutout
Center line of
Blower Intake
A
B
Center Line
Y- Ducting Transition
C
D
Downdraft Vent Intake
Cutout Opening
Width
A. 19 / " (48.8 cm)
5
64
B. 15 / " (40.4 cm)
29
32
C. 6 / " (16.2 cm)
23
64
D. Center line blower intake
Center Line
Center Line
Blower Intake
Center Line
Cutout
11