Description Of The Product; Elements Of The Complete Installation - Erreka ABC2M-009 Manuel De L'installateur

ABC2M-009_ES_FR_EN_PT_DE.book Page 39 Thursday, April 17, 2008 9:43 AM

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1 Operator (BUL)
2 Flashing lamp
3 Gate
4 Exterior photocells
5 Key selector
6 Wall button
7 Control panel
8 Connectors case
9 Underground electrical installation
10 Interior photocells
11 In-ground stop in closing
12 Reception antenna
13 Electrolock
ELECTRICAL CABLING:
Element
A: General power supply
B: Flashing lamp
C: Photocells
D: Key selector
E: Operator
F: Antenna
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.

The facility is operated by way of the button (6) or
wall key (5), or using the remote control.
Nº threads x section
2
3x1.5mm
2
2x0.5mm
2
2x0.5mm
2
2x0.5mm
2
5x1mm
Shielded cable
Maximum length
30m
20m
30m
25m
8m (maximum 25m with cable 5x2.5mm
5m

The in-ground stop in closing (11) is an
essential element.

The photocells (4) and (10) provide additional safety
to that already provided by the control panel.For
greater safety, Erreka recommends installing the
photocells (4) and (10).
English
2
)
39
Control panel ABC2M-009