Cup Holder - Maxi-Cosi Zelia Mode D'emploi

8
Canopy
Press clips onto each side of the seat (Figure
8). Ensure that the clips are flush against the
stroller frame (Figure 8a).
Fit the seat recline/fold lever through the
opening in the back of the canopy (Figure
8b).
Attach metal snaps on the canopy to snaps
on the frame (Figure 8c).
NOTE: You can extend the canopy in two
ways: At the front of the canopy, pull
outward on the flip-out visor. At the back
of the canopy (closest to the handlebar),
unzip the canopy to reveal an extra fabric
panel that provides additional coverage.
9

Cup Holder

Cup holder can be installed on either side of the stroller handle. Slide
cup holder down onto knob (Figure 9).
CAUTION:
• Never hang parcels or accessories from cup holder as the stroller
may tip over.
• Never place more than 1-LB (0.5-kg) in cup holder.
Assembly and Use
5
Clips 2x
8
&
Flush
8a 8b
9
8c