Repeat Playback - Technics SU-R1 Mode D'emploi

∫ Random repeat playback
Press [RND].
Each time you press the button:
All tracks in a folder are repeated
On
randomly.
≥ "RND `" is displayed.
Off Turns off random repeat mode.

∫ Repeat playback

Press [`].
Each time you press the button:
Only plays the selected track.
1-Track
≥ "1 `" is displayed.
All tracks in a folder are repeated.
All
≥ "`" is displayed.
Off Turns off repeat mode.
≥ You cannot use random repeat playback in combination with other
playback modes.
≥ You can use repeat playback in combination with programme
playback.
18
(18)
Programme playback
This function allows you to programme up to 24 tracks.
Preparation
≥ It is not possible to programme tracks by moving folders.
Move all the tracks you want to programme to a single
folder in advance.
1
Press [PGM] in the stop mode.
≥ "Program Mode" screen will be displayed.
2
Press [OK] to display the programming
screen.
3
Press [3, 4] to select the desired track.
4
Press [OK].
≥ Do steps 3 through 4 again to programme other tracks.
5
Press [1/;] to start playback.
≥ To return to the "Program Mode" screen, press [∫].
Operations on the remote control
Press [∫].
Stop
≥ Programmed content is maintained.
Check the Press [2, 1] in the stop mode.
≥ To return to the "Program Mode" screen,
programmed
press [RETURN].
order
Add tracks Do steps 3 through 4 in the stop mode.
Press [CLEAR] in the stop mode.
Clear the last
≥ It is not possible to select and clear the
track
desired programmed track.
1 Press [PGM] in the stop mode.
≥ "Program Clear" is shown.
Cancel
2 Press [3, 4] to select "Yes" and
programme
then press [OK].
mode
≥ The programme memory will be
cleared.
≥ Programmed content is maintained as long as the input source is
set to "USB".
≥ The programme memory will be cleared:
– When the USB device is disconnected.
– When the unit is turned to standby or off mode.
≥ You can use programme playback in combination with repeat
playback.