Using Iphone/Ipad/Ipod - Technics SU-R1 Mode D'emploi

Using iPhone/iPad/iPod

Connect your iPhone/iPad/iPod, and you can play back
music stored on iPhone/iPad/iPod or charge
iPhone/iPad/iPod.
∫ Compatible iPhone/iPad/iPod
iPhone 6 Plus / iPhone 6 / iPhone 5s / iPhone 5c /
iPhone 5 / iPhone 4s / iPhone 4 / iPhone 3GS /
iPhone 3G
iPad Air / iPad (3rd and 4th generation) / iPad 2 / iPad /
iPad mini with Retina display / iPad mini
iPod touch (2nd through 5th generation)
iPod nano (3rd through 7th generation)
≥ Compatibility depends on the software version. Update your
iPhone/iPad/iPod to the latest software before using it with this
unit.
≥ Please be aware that Panasonic accepts no responsibility for the
loss of data and/or information.
≥ Do not connect the following models to the port:
– iPod classic, iPod [4th (colour display), and 5th (video)
generation], iPod nano (1st generation)
Unexpected behaviour may occur.
≥ Operation results may vary depending on the iPhone/iPad/iPod
models.
Connecting an
iPhone/iPad/iPod
When connecting an iPhone/iPad/iPod, use the dedicated
USB cable (not supplied).
e.g.,
This unit
(front)
USB cable
(not supplied)
16
(16)
(as of September 2014)
iPhone, etc.
Listening to music stored on
an iPhone/iPad/iPod
1
Connect iPhone/iPad/iPod to the unit.
2
Press [USB].
3
Start play.
Operations on the remote control
Stop Press [∫].
Press [1/;].
Pause
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
During play or pause, press and hold
Search
[6] or [5].
≥ It may be necessary to select the album, artist, etc. on the
iPhone/iPad/iPod.
≥ Depending on the iOS version, this function may not be available.
Charging an iPhone/iPad/iPod
During unit on, charging starts when an iPhone/iPad/iPod is
connected to this unit.
≥ Charging is not possible when this unit is turned off.
≥ Make sure the unit is turned on when you start charging.
– When charging an iPhone/iPad/iPod whose battery is depleted,
do not turn this unit to standby mode until the iPhone/iPad/iPod
becomes operational.
≥ Check the iPhone/iPad/iPod to see if the battery is fully charged.
Once fully charged, remove the iPhone/iPad/iPod.
≥ Charging stops when the battery is fully charged. The battery will
deplete naturally.