Using Airplay; Using Usb Device - Technics SU-R1 Mode D'emploi

Using AirPlay

AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion or later, and PC
with iTunes 10.2.2 or later.
Listening to music with AirPlay
Preparation
≥ Complete the network settings. (
≥ Connect the iOS device or PC to the same network as this
unit.
1
: Start the "Music" (or iPod) app.
[iOS_device]
: Start "iTunes".
[PC]
2
Select "Technics SU-R1 _ _ _ _ _ _"*
the AirPlay icon.
≥ Check the volume settings before starting the playback.
(When AirPlay is used for the first time, the volume may
be output at the maximum setting.)
3
Start play.
≥ The playback will start with a slight delay.
Operations on the remote control
Stop Press [∫].
Press [1/;].
Pause
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
≥ Playback of other audio sources will stop and AirPlay output will
have priority.
≥ Volume changes on the iOS device or iTunes will be applied to this
unit. (Refer to the iTunes Help for the required settings in iTunes.)
≥ With some iOS and iTunes versions, it may not be possible to
restart the AirPlay playback if the selector is changed or the unit is
turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the
Music app or iTunes and then re-select this unit as the output
speakers.
≥ AirPlay will not work when playing back videos on iTunes.
*1 " _ " stands for a digit that is unique to each set.
*2 The device name can be changed from "To make network-
related settings". ( 14)
14)
from
1, 2

Using USB device

You can play back music stored on a USB device.
≥ This unit does not guarantee connection with all USB devices.
≥ FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 high speed.
≥ USB devices may not be recognised by this unit when connected
using the following:
– a USB hub
– a USB extension cable
≥ It is not possible to use USB card reader/writers.
≥ This unit cannot record music to a USB device.
≥ About supported format, refer to "File format" (
Listening to music stored on a
USB device
1
Connect a USB device to the unit.
e.g.,
USB device
2
Press [USB].
3
Press [3, 4] to select an item and then
press [OK].
≥ If there are any other items, repeat this step.
Operations on the remote control
Stop Press [∫].
Press [1/;].
Pause
≥ Press again to restart play.
Press [:] or [9] to skip track.
Skip
≥ If you press either of these buttons during
pause, playback will restart.
During play or pause, press and hold
[6] or [5].
Search
≥ This operation may not be available for
some formats.
28)
This unit
(front)
(17)
17