Mounting The Holder Frames - Miele A 623 Mode D'emploi

en - Installation
38

Mounting the holder frames

2 holder frames are placed on each side of the upper strut of the
module. The slanted corners of the holder frames centre the measur-
ing cylinders during reprocessing. After mounting, they must point
downwards.
The centre holder frames must be mounted on both sides first.
Position the holder frame on one of the side struts of the module so

that the pins of the frame reach around the strut . The holder
frame must be facing outwards and the slanted corners must be fa-
cing downwards.
Slide the holder frame upwards along the strut .

Secure the holder frame in a recess .

Place the other holder frames in the required positions.
