Sedus swing up Mode D'emploi page 9

F
Depth of the seat (optional)
Increase the seat depth:
P
Grip the sides of the plastic
1.
section on the bottom of the
seat and slide forwards
The seat surface increases in size
2.
Decrease the seat depth:
P
Roll in the seat surface at the
1.
front curved section
The seat surface decreases in size
2.
J
C
G
Adjusting the seat tilt (optional)
To tilt the seat forwards:
P
Stand up
1.
Pull the lever upwards, the seat
2.
will rise automatically
Release lever to lock
3.
To return the seat to horizontal:
P
Stand up
1.
Pull the lever upwards, sit down
2.
on the seat and return to the
normal, horizontal position
Release lever to lock
3.
H
Similar-Swing mechanism can
be deactivated (optional)
Deactivate the mechanism:
P
Stand up
1.
Pull the lever upwards
2.
Seat is locked
3.
Activate the mechanism:
P
Stand up
1.
I
Pull the lever upwards
2.
Seat is set dynamically
3.
F
A
E
I
Adjusting the multifunction
armrests (optional)
To adjust the height of the
P
armrests:
Press and hold the button under
1.
the armrest cover
Raise or lower the armrest to
2.
the desired height
Release the button to lock
3.
the armrest
To adjust the depth of the
P
armrests:
slide the armrest cover back-
wards or forwards; it will lock
in place automatically
To adjust the sitting width
P
between the armrests
Slide the armrest cover out-
wards or inwards; it will lock in
place automatically
J
Adjustment of the headrest
(optional)
Adjusting the height:
P
Push the headrest to the desired
height
Headrest angle:
P
Adjust the tilt of the headrest
as desired
English 9