Low-Power Consumption Mode - Sony Walkman TCD-D100 Mode D'emploi

Low-power Consumption Mode

If the tape-corder
remains in the stop mode
for 3 minutes* or longer,
it will enter the low-
power consumption
mode automatically to
conserve the battery.
* The unit will enter the
low-power
consumption mode
when the cassette
holder is open for
about 30 seconds.
When the CLOCK
button, etc., is pressed
during a low-power
consumption mode, the
unit will re-enter the
low-power
consumption mode in
about 30 seconds.
HOLD
When the unit automatically switches to the low-
power consumption mode
The tape unloads automatically to protect the tape and
the tape-corder enters the low-power consumption
mode to conserve the battery when the tape-corder is
in the stop mode for 3 minutes* or longer. In the low-
power consumption mode, the display changes to the
clock and the backlight turns off. On the remote
control the display is turned off.
To enter the low-power consumption mode
manually
1
Make sure that the tape-corder is in the stop mode.
Press the p STOP button if the tape-corder is in the
pause mode.
2
Slide the HOLD switch on the main unit to show
the yellow hold mark.
The tape-corder enters the low-power
consumption mode.
When you press a button "
few seconds in the display.
p STOP
" will flash for a
Power Sources
35 EN