Moen 8300 Série Guide D'installation page 2

Parts List
A. Brackets (x2)
B. Slide Bar & Clamp
C. Bracket Adapter (x2)
D.* Toggle Bracket (x2) & Toggle Screws (x2)
E. Plug Button (x2)
F. Wood Screws (x2)
* Not supplied / sold separately
1
"
"
7 / 6 4
7 / 8
2 8
"
7 / 6 4
Using a 7/64" drill bit, drill pilot hole to determine if there' s a
stud. If no wood stud, go to step 2A.
Using a 7/64" drill bit, drill pilot hole to determine if there' s a
stud. If no wood stud, go to step 2A.
Using a 7/64" drill bit, drill pilot hole to determine if there' s a
stud. If no wood stud, go to step 2A.
A
B
C
x2
optional/opcional/facultatif
D
x2
Not included / Sold separetly
No incluido / Sold separetly
Non inclus / Sold separtely
E
x2
F
x2
Lista de piezas
A. Ménsulas (x2)
B. Barra deslizante y abrazadera
C. Adaptador de la ménsula (x2)
D.
Toggle Bracket (x2) & Toggle Screws (x2)
E. Botón tapón (x2)
F.
Wood Screws (x2)
* Not supplied / sold separately
2
Wood Screw Installation
Wood Screw Installation
Wood Screw Installation
"
5 / 1 6
"
7 / 8
2 8
"
5 / 1 6
Using a 5/16" drill bit, drill hole through tile only. Go to step
3.
Using a 5/16" drill bit, drill hole through tetile only. Go to
step 3.
Using a 5/16" drill bit, drill hole through tetile only. Go to
step 3.
3
CAUTION — TIPS FOR
REMOVAL OF OLD FAUCET:
Always turn water supply OFF before removing existing
faucet or disassembling the valve. Open faucet handle to
relieve water pressure and ensure that complete water shut-
off has been accomplished.
PRECAUCIÓN — CONSEJOS PARA
CAMBIAR LA LLAVE MEZCLADORA:
Siempre CIERRE la toma de agua antes de quitar la llave
existente o desmontar la válvula. Abra la llave para liberar la
presión, y asegúrese de que esté bien cerrada el agua.
ATTENTION — SUGGESTIONS
POUR ENLEVER L'ANCIEN ROBINET:
Toujours couper l'alimentation en eau avant d' e nlever ou de
démonter le robinet. Ouvrir le robinet pour libérer la pression
d' e au et pour s'assurer que l'alimentation en eau a bien été
coupée.
Liste des pièces
A. Support (2)
B. Barre coulissante et pince
C. Adaptateur de support (2)
D.*
Toggle Bracket (x2) & Toggle Screws (x2)
E. Bouton de bouchage (2)
F.
Wood Screws (x2)
* Not supplied / sold separately
2A
Hollow wall installation
Hollow wall installation
Hollow wall installation
"
5 / 8
"
7 / 8
2 8
"
5 / 8
Using a 5/8" drill bit, drill into hollow wall.
Using a 5/8" drill bit, drill into hollow wall.
Using a 5/8" drill bit, drill into hollow wall.