Connecting The Units - Pioneer DEH-P8400MP Manuel D'installation

Connecting the Units

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
1*
3*
5*
Connect leads of the same
color to each other.
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
3
TEL terminal
Refer to handsfree telephone unit's manual
(sold separately).
2*
Multi-CD player
(sold separately)
4*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (5*) Red (4*)
Accessory To electric terminal controlled
(or back-up) by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
15 cm
15 cm
Antenna jack
IP-BUS input (Blue)
15 cm
IP-BUS cable
This Product
Fuse holder
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
15 cm
Front output
(FRONT OUTPUT)
15 cm
Rear output
(REAR OUTPUT)
23 cm
Subwoofer output
or Non Fading Output
(SUBWOOFER or
NON-FADING
OUTPUT)
Fuse resistor
Fuse resistor