Zipper Maschinen ZI-COM24E Mode D'emploi page 19

To avoid malfunction, machine defects and injuries, read the following security instructions!

 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor!
 Make sure the work area is lighted sufficiently!
 Work only in a well ventilated area!
 Do not overload the machine!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden!
 Only one person shall operate the machine
 The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills compared
with conventional workers.
 Do not allow other people, particularly children, to touch the machine or the cable.
Keep them away from your work area
 Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m
 Use personal safety equipment: ear protectors, safety goggles and work wear when
working with or on the machine!
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There
is a risk of electric shock, fire;

Protect the machine from dampness (causing a short circuit)

When working with the machine outdoors, use extension cables suitable for outdoor
use

Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)
 Check the cable regularly for damage
 Do not use the cable to carry the machine or to fix the work piece

Protect the cable from heat, oil and sharp edges
 Avoid body contact with earthed components
 Never leave the machine running unattended! Before leaving the working area
switch the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch

Safety instructions when working with compressed air guns
Compressor pump and lines reach high temperatures during operation. Touching cause burns
•
When removing the hose coupling, hold the coupling piece of the hose is by hand. So the injury from
•
rebounding hose is avoided
Safety instructions when paint spraying
Do not process paints or solvents with a flash point of less than 55 ° C.
•
Do not heat paints and solvents.
•
If harmful liquids processed use dust masks. Note the instructions on protective measures made by the
•
manufacturers of such substances.
During the paint spraying process and in the work space may not be smoked. Even paint fumes are highly
•
inflammable.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-COM24E / ZI-COM50E
SAFETY
19