Assembly - Char-Broil 12301732 Guide D'utilisation

ASSEMBLY

First, get a helper, this unit is heavy and will require a second person for lifting and moving. Open the carton and lay
1 1
it flat. This will give you a protective surface during assembly.
Assemble firebox side panels to the outside of the firebox back panel using ¼- 20 x ¾" screws and ¼" flange nuts.
Make sure to use the top hole and the third hole counting from top down.
1/4- 20 x 3/4" screws
(4 pieces)
1/4" Flange nuts
(4 pieces)
2 2
Assemble firebox front panel to firebox side panels using ¼-20 x 3/4 screws and ¼" flange nuts, as shown, tighten
all screws. Again make sure to use the top and third hole down.
1/4" Flange nuts
(4 pieces)
Page 8
Firebox side panel
Firebox back panel
Firebox front panel
1/4- 20 x 3/4"
screws
(4 pieces)