Char-Broil 12301732 Guide D'utilisation page 12

9
Place lid assembly on top of firebox then align hinge holes. Attach lid to firebox using 2 hinge pins . Once
hinge pins are in place, insert hitch pin into hole in hinge pins.
Hitch pin
(2 pieces)
Hinge pins
(2 pieces)
10
Attach lid handle to lid assembly using 2 handle bezels and two 1/4-20 x 3/4" screws and two washers as shown
below. Insert silicone lid bumper onto the two holes on sides of lid assembly.
1/4 - 20 x 3/4" screw
(2 pieces)
Page 12
Handle bezel
(2 pieces)
Lid handle
26 mm dia. washer (2 pieces)
Siilcone lid bumper (2 pieces)