Leveling The Appliance - Bosch B20CS30SNS Notice D'utilisation Et De Montage

Leveling the appliance

Note:
To ensure that it functions properly, the appliance must
be set level using a spirit level.
If the appliance is not level, it could cause the water to
run out of the ice-maker, produce unevenly sized ice
cubes or prevent the doors closing properly.
1. Move the appliance into its intended installation
position.
2. So that the appliance cannot move, unscrew the two
front feet until they are standing firmly on the floor.
3. Screw the feet in/out until the appliance is exactly
level. Use the appliance doors as a reference point.
4. If the freezer compartment door is lower:
5. If the fridge compartment door is lower:
If the appliance is exactly level but one of the doors is
lower than the other:
1. Open the appliance doors.
2. Unscrew the 3 screws holding the base panel and
remove it.
3. Undo the nut.
4. Turn the adjusting nut until the appliance doors are
aligned.
5. If the freezer compartment door is lower: Turn the
adjusting nut counter-clockwise.
6. If the fridge compartment door is lower: Turn the
adjusting nut clockwise.
7. Tighten the nut.
en-us
11