Sitting Down On A Chair; Rising To A Standing Position; Using The Hand Brakes - Invacare Delta Manuel D'utilisation

1. Place the walking aid slightly in front of you and take a
step towards it while using the hand grips for support.

4.6 Sitting Down on a Chair

1. Stand in front of the chair with the walking aid, the back
of your legs should touch the chair.
2. Lock both hand brakes of the walking aid.
3. Place your hands on the arms of the chair, lean forward
slightly and sit down carefully.

4.7 Rising to a Standing Position

WARNING!
Risk of tipping
– Do not use the walking aid to pull yourself up
from a sitting position.
1. Place the walking aid in front of you and lock both hand
brakes.
2. Use the armrests of the chair as support and rise
carefully to a standing position.
3. Once stable in a standing position, transfer hands to the
hand grips of the walking aid.

4.8 Using the hand brakes

1.
A
1. Apply the running brakes by pulling both brake handles
A upwards.
2. To apply the parking brakes, press the brake handles
A completely downwards.
An audible sound indicates that the brake is in
the correct position.
1542458-D
2.
A
It is important that both brakes are put into parking
position.
3. To release the parking brakes, pull the brake handles
upwards.
Adjusting the brake effect
WARNING!
Risk of poor brake effect
– The adjustment of the brake must be done by
qualified personnel.
A
The brake can be adjusted both by the handle A or below
by the wheel B.
Spanner 8 mm and 10 mm (not included)
4.9 Mounting the bag, basket and tray
Bag
A
1. Mount the bag A between the frame tubes.
2. Fold the attachment flaps B over the tubes and secure
the buttons.
3. Repeat the procedure on the opposite side.
Basket
1.
Attach the basket C on the attachment hooks D.
5