Unit Description; Technical Specifications - BoomToneDJ Slim PAR 7x LED 10W-RGBW Mode D'emploi

2- Unit Description

Buttons:
1. MENU
menu
2. UP
3. DOWN
4. ENTER To go into the next layer menu
5. Signal indicator light
In DMX or SLAVE mode, the Signal indicator light flashing when signals are
detected
6. Mains input：Connect to supply mains power.
7.Mains output：Connect to supply mains power for the next unit.
8. DMX input: For DMX512 link, use 3-pin XLR plug cable to input DMX signal.
9. DMX output：For DMX512 link, use 3-pin XLR plug cable to link the next unit.
Note:
(1)In ten seconds, if no buttons to press, the LED display will be off.
(2)After pressing a button, all the parameters will save automatically
after 2 seconds.
(3)No matter the item is in which program in which mode, once

3- Technical Specifications


Power supply：AC100-240V 50/60Hz

Fuse：F3A/250V

Power Supply：IEC Input/output block

Light source：10 Watt 4 in One LEDs, RGBW

Beam Angle: 45 degrees

Channel：8 DMX channels selectable

Packing Dimensions ：L230×W220×H85mm

Gross Weight：3.5 kg
To go forward in the selected functions or go back the last layer
To go forward in the selected functions or increase parameters
To go backward in the selected functions or reduce parameters
Press any button to turn the display on again.
detecting DMX or SLAVE signal, the program will jump into
DMX or SLAVE mode automatically. Then,if DMX/SLAVE
signal off, the program will return to the original mode .
9