Setting The Clock - Sony Cyber-shot DSC-W630 Mode D'emploi

x
To remove the memory card/battery pack
Memory card: Push the memory card in once.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Note
• Never remove the memory card/battery pack when the access lamp (page 8) is lit.
This may cause damage to data in the memory card/internal memory.

Setting the clock

1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you press the ON/OFF (Power)
button for the first time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select a desired geographic location by following the
on-screen instructions, then press z.
4
Set [Date & Time Format], [Summer Time] and
[Date & Time], then press [OK].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Operate following the instructions on the screen.
• The battery power may decrease faster when [Disp. Resolution] is set to
GB
12 [High].
ON/OFF (Power)
Control button
Select items: v / V
Set: z
/ b / B