Mains Part - Beurer medical BM 49 Mode D'emploi

• The accuracy of this blood pressure monitor has been carefully checked and developed with regard to
a long useful life. If using the device for commercial medical purposes, it must be regularly tested for
accuracy by appropriate means. Precise instructions for checking accuracy may be requested from the
service address.

11. Mains part

Model no.
Input
Output
Supplier
Protection
Enclosures and Protective
Covers
FW 7575M/EU/6/06
100 – 240 V, 50 – 60 Hz
6 V DC, 600 mA, only in connection with beurer blood pressure monitor.
Friwo Gerätebau GmbH
This device is double insulated and protected against short circuit and
overload by a primary thermal fuse.
Make sure to take the batteries out of the compartment before using the
mains part.
Polarity of the the DC voltage connection
Double insulated / equipment class 2
Equipment enclosed to protect against contact with live parts, and with
parts which can become live (finger, pin, hook test).
The operator shall not contact the patient and the output plug of AC
mains part simultaneously.
56